Star-filled Created with Sketch.

HRANIFIX INDUSTRY - Contactlijm

Om prijzen te kunnen bekijken moet u zich eerst aanmelden of registreren.

Verpakking
17 kg canister
 

Productomschrijving

Contact adhesive for a wide range of bonding various materials and surfaces. It is resistant to higher temperatures and to water. It is easily applied by spraying. For professional usage only.

Usage:

  • bonding wood,
  • bonding MDF and chip boards,
  • bonding polyurethane foam, fiber-glass,
  • bonding laminates,
  • bonding cardboard, most plastics,
  • bonding aluminium sheets and most metals.

Characteristics:

Quality industrial adhesive Hranifix Industry is suitable for various materials bonding. The joint is fixed within a few minutes.

Dry matter content is 28–32 %.

The adhesive is colourless. It is water resistant and stable in temperatures up to 85 °C.

Application:

Hranifix Industry adhesive is applied by spraying, which is activated by pressure.

You shall prepare the surface to be clean, dry and free of dust before the application. After such a preparation you can apply the adhesive on both bonding surfaces. Application must be carried out at the temperature of 15–25 °C and at the distance of 15–25 cm from the surface of the material bonded.

The ideal joint is achieved by covering 80–100 % of the surface with a thin and uniform layer of adhesive. Do not apply too thick layer so that the adhesive is not spread around. While having the optimum coating, the adhesive creates a surface film similar to a spider net.

After applying the layer, allow the adhesive to ventilate for about 3 minutes (the adhesive is dry when being touched). After the solvent evaporates, you should put the surface together and strongly press it (or squeeze). Regarding porous materials, you can apply the second layer after venting. The layer increases the bond strength.

We recommend using the cleaning agent Hraniclean 01 to clean the unwanted adhesive remains.

Test all your materials before a regular usage.

You can additionally order 3.6 m of the Hranifix Hose and Hranifix Gun – the applying gun.

Packaging and storage:

Store only in original, firmly sealed packaging in dry, cool, and well-ventilated areas. Keep it away from direct sunlight or the temperatures above 50 °C. High temperature may cause an explosion. The floor of the storage must be waterproof and solvent resistant.

With the proper storage, the adhesive stays stable for 12 months.

Accessoires

HRANIFIX Slang - Toebehoren

Verpakking :
3,6 m

HRANIFIX Pistool - Toebehoren

Verpakking :
1 pc