JOWACOLL 124.00 - PVAc Dispersive Adhesive
Iniciar la sesión o registrarse para conocer los precios.
| Embalaje | |||||
|---|---|---|---|---|---|
|
25 kg | ||||
Descargas
Parámetros
| Producer Product Designation | C000132 - 83012400XXX0025 |
|---|
Descripción del producto
PVAc glue Jowacoll 124.00 is very easy to use, fast setting and joint-filling. Mainly to be used for a flat bonding, for instance of veneers and laminate panels to particleboards, and for doubling procedures of particleboards. Also for bonding soft wood species used in the manufacture of edge-bonded panels.
USAGE / EXAMPLE OF USAGE
- bonding veneers and laminate panels to particleboards
- used for fingerjointing
- bonding soft wood species
TECHNICAL DATA & SUITABLE WORKING CONDITIONS
Parameter | Value |
Appearance | Liquid |
Colour | White |
Viscosity (Brookfield 20 °) | 9 500 ± 1 000 mPas |
Solid content, 2h at 90 °C (%) | 65,5 ± 1,5 |
pH value at 20 °C | 7,00 ± 0,50 |
Density at 20 °C | 1,24 ± 0,05 g/cm3 |
Minimum film-forming temperature (MFFT) (°C) | approx. 3 ± 1 |
Wood, Room and Glue temperature | 15° C |
Relative humidity | 65 – 75 % |
Wood humidity content | 9 – 12 % |
Coating | 120 ± 40 g/m2 |
Open time at 20 °C and with normal conditions | 6 ± 1 min |
Minimum pressing time: |
|
20 °C | approx. 2 min |
50 °C | approx. 1 min |
90 °C | approx. 1 min |
Pressure (N/mm2) | > 0,2 |
APPLICATION / HANDLING
Wood preparations: work pieces should be properly planed and free of dust and grease. Tolerances cause prolonged setting times and less mechanical strength. You can use any of the common application ways. Before use, mix the adhesive and test all materials intended for bonding to be sure about good results. Make sure that the wood does not contain tannin, such wood may change colour when using Jowacoll 124.00.
Jowacoll 124.00 is applied with the common application tools on one or both sides. The coating weight depends on the absorption and the surface conditions of the materials to be bonded. Among others, the temperature, humidity and absorption of the materials, the coating weight and the tension within the material have different influence on the open time, the setting time and the pressing time. Heat accelerates the setting procedure and shortens the open time. Do not apply below +15 °C (room and material temperature).
We recommend that all materials coming into contact with the glue are made of high-quality stainless steel or of inert plastic, e.g. Teflon, PP, polyamide. Avoid contact with other metals like zinc, brass, cooper or aluminium.
CLEANING
After use machines and equipment can be cleaned with cold or warm water with Hraniclean 07 Cleaning Concentrate.
PRECAUTIONS FOR SAFE USING
Please consider the material safety data sheet of the product prior to handling.
STORAGE
Store in the original, well-sealed packaging in a cool, dry environment at temperatures between 15 – 25 °C. Shelf life is 12 months from the date of filling if proper storage conditions are observed. Protect from frost and direct sunlight!
TRANSPORT
Information concerning safety and handling through the transport please refer to the Safety Data Sheet.
