JOWACOLL 103.05 - PVAc Dispersive Adhesive
Iniciar la sesión o registrarse para conocer los precios.
| Embalaje | |||||
|---|---|---|---|---|---|
|
5 kg | ||||
|
10 kg | ||||
|
30 kg | ||||
Descargas
Parámetros
| Producer Product Designation | C000125 - 83010305XXX0005 , C000126 - 83010305XXX0010 , C000127 - 83010305XXX0030 , C000382 - 83010305XXX0020 , C000432 - 83010305XXX1100 , C001208 - 83010305XXX0030E |
|---|
Descripción del producto
Jowacoll 103.05 is a reactive PVAc dispersion adhesive. It is colourless. Meets requirements according to durability class D3, after addition of 5 % Jowat Crosslinking Agent 195.40 hardener addition to class D4 according to DIN EN 204/205. For all bonding purpose requiring increased resistance to wet environments, e.g. for doors, windows and furniture in high-humidity areas.
USAGE / EXAMPLE OF USAGE
- doors, windows
- furniture in high-humidity areas
- soft and hard wood
- particleboards
- laying parquet and laminate (tongue-and¬groove) flooring
- veneer materials
TECHNICAL DATA & SUITABLE WORKING CONDITIONS
Parameter | Value |
Appearance | Liquid |
Colour | White |
Viscosity (Brookfield 20 °C) | 12 000 ± 3 000mPas |
Solid content, 2h at 90 °C (%) | 50 ± 2 |
pH value at 20 °C | 3,00 ± 0,50 |
Density at 20 °C | 1,08 ± 0,05 g/cm3 |
Minimum film-forming temperature (MFFT) (°C) | approx. 4 ± 1 |
Wood, Room and Glue temperature | 15 °C |
Relative humidity | 65 – 75 % |
Wood humidity content | 9 – 12 % |
Coating | 175 ± 25 g/m2 |
Open time at 20 °C and with normal conditions | 6 ± 2 min |
Minimum pressing time: |
|
20 °C | approx. 20 min |
50 °C | approx. 4 min |
90 °C | approx. 1,5 min |
Pressure (N/mm2) | > 0,5 |
APPLICATION / HANDLING
Wood preparations: work pieces should be properly planed and free of dust and grease. Tolerances cause prolonged setting times and less mechanical strength. You can use any of the common application ways. Before use, mix the adhesive and test all materials intended for bonding to be sure about good results. Make sure that the wood does not contain tannin, such wood may change colour when using Jowacoll 103.05.
Jowacoll 103.05 is applied with the common application tools on one or both sides. The coating weight depends on the absorption and the surface conditions of the materials to be bonded. Among others, the temperature, humidity and absorption of the materials, the coating weight and the tension within the material have different influence on the open time, the setting time and the pressing time. Heat accelerates the setting procedure and shortens the open time. Do not apply below +15 °C (room and material temperature).
We recommend that all materials coming into contact with the glue are made of high-quality stainless steel or of inert plastic, e.g. Teflon, PP, polyamide. Avoid contact with other metals like zinc, brass, cooper or aluminium.
CLEANING
After use machines and equipment can be cleaned with cold or warm water with Hraniclean 07 Cleaning Concentrate.
PRECAUTIONS FOR SAFE USING
Please consider the material safety data sheet of the product prior to handling.
STORAGE
Store in the original, well-sealed packaging in a cool and dry (15 – 25 °C). Shelf life is 6 months from the date of filling if proper storage conditions are observed. Protect from frost!
