HRANIFIX - Cleaner for Hose and Gun Hranifix

HRANIFIX Cleaner is a high-quality industrial solvent based cleaner that will remove unwanted adhesive within minutes. HRANIFIX Cleaner is designed to clean out our spray equipment that may have been stood. Resurrect your hoses that have been cast aside due to blockages from lack of use. Or simply keep your equipment regularly maintained.

USAGE / EXAMPLE OF USE

• Cleaning equipment
• Gun & hose maintenance

TECHNICAL DATA

Parameter Value
Appearance Gas
Colour Colourless
Boiling point 40 °C
Auto-ignition temperature >556,1 °C
Density by 25°C 1,30 g/ml3

APPLICATION / HANDLING

Connect your spray gun and hose onto the canister. Remove your brass spraying tip from the gun. Turn on the canister and check for leaks. Pull the guns trigger for a few second to allow the flow of the cleaner. For completely blocked hoses, please allow the cleaner to stand for 30 minutes and try pulling the trigger again. Once the cleaner enters the hose, leave to stand for a few minutes. Pull the trigger and allow a flow of cleaner to pass through the system. If you blockages still remain, please try the steps again or contact us for further advice.

PRECAUTIONS FOR SAFE USING

Please consider the material safety data sheet of the product prior to handling.

STORAGE

The maximum shelf life is 18 months. Protect from sunlight and do not expose to temperatures above 50°C.

TRANSPORT (ADR)

Information concerning safety and handling through the transport please refer to the Safety Data Sheet.